T-5T/T-5TSL

Specifications
WEIGHT CAPACITY DECK LENGTH(S) DECK HEIGHT OVER-ALL WIDTH LOAD WIDTH TONGUE LENGTH TILT ANGLE(S) RAMPS DECK TYPE BRAKES TIRES WHEELS AXLE HITCH TIE DOWNS PARKING JACK SAFETY CHAINS MUD FLAPS SIDE RAILS MAIN FRAME HEAD BOARD X-MEMBERS WIRING LIGHTING REG. HOLDER FINISH	1,950 lbs. / 2,100 lbs. / 2,250 lbs. (885kg / 953kg / 1021kg) 5,000 lbs. (2268kg) with adequate hitch load 12'-0" / 14'-0" (3658mm / 4267mm) 15.5" (356mm) empty 8'-6" (2591mm) 77" (1956mm) 5'-0" (1524mm) 11 degrees / 9 1/2 degrees / 8 1/2 degrees n/a 2" nominal oak electric, with wet cell break-a-way system (12" x 2") (2) ST225/75R x 15, load range "D" (2) 6" x 15" white modular (6 bolt on 5 1/2" b.c.) (1) 6,000 lb., Torflex, with E-Z lube hubs adjustable ball coupler or 3" i.d. pintle ring (6) heavy duty 3/4" forged D-rings (1) 7,000 lb. drop leg (bolted on) 3/8" x 40" long with safety hooks and latches standard 7" (178mm) high high tensile M4 x 13 wide flange beam 7" (178mm) high, channel iron high tensile 3" jr. I-beam, 16" (406mm) o.c. sealed modular harness with circuit breakers sealed beam, flush/shock mounted (reflectorized) standard acid etched, undercoated, primed /painted (before decking) Check local D.O.T. laws before ordering with hydraulic surge brakes
	T-5TSL
WEIGHT CAPACITY DECK LENGTH(S) DECK HEIGHT OVER-ALL WIDTH LOAD WIDTH TONGUE LENGTH TILT ANGLE(S) RAMPS DECK TYPE BRAKES TIRES WHEELS AXLE HITCH TIE DOWNS PARKING JACK SAFETY CHAINS MUD FLAPS SIDE RAILS MAIN FRAME HEAD BOARD X-MEMBERS WIRING LIGHTING REG. HOLDER FINISH	2,110 lbs. / 2,260 lbs. / 2,410 lbs. (957kg / 1025kg / 1093kg) 5,000 lbs. (2268kg) with adequate hitch load 12'-0" / 14'-0" (3658mm / 4267mm) 15.5" (356mm) empty 8'-6" (2591mm) 77" (1956mm) 5'-0" (1524mm) 7 degrees / 6 degrees / 5 1/2 degrees adjustable, 16" (406mm) wide x 3'-0" (914mm) long, mesh top 2" nominal oak electric, with wet cell break-a-way system (12" x 2") (2) ST225/75R x 15, load range "D" (2) 6" x 15" white modular (6 bolt on 5 1/2" b.c.) (1) 6,000 lb., Torflex, with E-Z lube hubs adjustable ball coupler or 3" i.d. pintle ring (6) heavy duty 3/4" forged D-rings (1) 7,000 lb. drop leg (bolted on) 3/8" x 40" long with safety hooks and latches standard 7" (178mm) high high tensile M4 x 13 wide flange beam 7" (178mm) high, channel iron high tensile 3" jr. I-beam, 16" (406mm) o.c. sealed modular harness with circuit breakers sealed beam, flush/shock mounted (reflectorized) standard acid etched, undercoated, primed/painted (before decking) Check local D.O.T. laws before ordering with hydraulic surge brakes.