T-50T

Specifications

WEIGHT
CAPACITY
DECK LENGTH
DECK HEIGHT
OVER-ALL WIDTH
TONGUE LENGTH
TILT ANGLE
TILT CUSHION
RAMP
DECK TYPE
BRAKES
TIRES
WHEELS
AXLES
SUSPENSION
AUTO. SLACK ADJ.
HITCH
TIE DOWNS
PARKING JACK
SAFETY CHAINS
TOOL BOX
MUD FLAPS
SIDE RAILS
MAIN FRAME
HEAD BOARD
X-MEMBERS
WIRING
LIGHTING
REG. HOLDER
FINISH

11,700 lbs. (5307kg)
50,000 lbs. (22680kg) with adequate hitch load
30'-0" (9144mm), 24'-0" (7315mm) tilt deck w/ 6'-0" (1829mm) stationary
33 1/2" (851mm) loaded
8'-6" (2591mm)
5'-2" (1575mm)
10 degrees
(1) 3 1/2 x 16 cushion cylinder
full width auto-kick out (doubles as under-ride protection)
2" nominal oak (flush deck)
air, 12 1/4" x 7 1/2" w/ ABS (2s/2m) & park brake on all axles
(12) 215/75R x 17.5, 16 ply, load range "H"
(12) 6.75 x 17.5, budd standard, cast spoke optional
(3) 22,500 lb., with oil bath bearings
9700 Hutchens, adjustable
standard
adjustable, heavy duty 3" i.d. pintle ring
(10) heavy duty 1" forged D-rings, 6 on tilt deck, 4 on stationary deck
(1) 25,000 lb., two speed (bolted on)
5/8" (16mm) gr. 80 x 40" (1016mm) with safety hooks/latches
standard, lockable
standard
8 x 2 x 1/4" tubing
W16 x 26, gr. 50, cold formed frame/tongue
5 1/2" (140mm) high, channel iron
high tensile 3" jr. I-beam 16" (406mm) o.c.
sealed modular harness with circuit breakers
sealed beam, flush/shock mounted (reflectorized)
standard
acid etched, polyurethane undercoating, primed/painted (before decking)

Note: Trailer is subject to Federal Excise Tax.

Optional Equipment

* abs brakes on 2 axles (4s/2m) or 3 axles (6s/3m)
* additional tie downs
* budd wheels (shown on front)
* paver model
* spare tire/rim
* special color
* winch and cable
* 8'-0" (2438mm) over-all width
* 54 1/2" axle spacing
*Air Lift Front Axle