T-20T

Specifications

WEIGHT
CAPACITY
DECK LENGTH
DECK HEIGHT
OVER-ALL WIDTH
TONGUE LENGTH
TILT ANGLE
TILT CUSHION
RAMP
DECK TYPE
BRAKES
TIRES
WHEELS
AXLES
SUSPENSION
AUTO. SLACK ADJ.
HITCH
TIE DOWNS
PARKING JACK
SAFETY CHAINS
TOOL BOX
MUD FLAPS
SIDE RAILS
MAIN FRAME
HEAD BOARD
X-MEMBERS
WIRING
LIGHTING
REG. HOLDER
FINISH

5,900 lbs. (2676kg)
20,000 lbs. (9072kg) with adequate hitch load
24'-0" + 4'-0" (7315mm + 1219mm)
33 1/2" (851mm) loaded
8'-6" (2591mm)
5'-2" (1575mm)
10 degrees
(1) 3 1/2 x 16 cushion cylinder
full width auto-kick out (under-ride protection)
2" nominal oak (flush deck)
electric, with wet cell break-a-way (12 1/4" x 4")
(8) 235/85R x 16, 10 ply, load range "E"
(8) 6" x 16", budd type, 8 bolt
(2) 10,000 lb., heavy duty (with oil bath bearings)
9700 Hutchens, adjustable
standard (air brake models)
adjustable, heavy duty 3" i.d. pintle ring
(10) heavy duty 1" forged D-rings
(1) 12,000 lb. drop leg (bolted on)
3/8" high tensile x 40" with safety hooks/latches
standard, lockable
standard
8 x 2 x 3/16" tubing
W10 x 17, gr. 50, one piece cold formed tongue
5 1/2" (140mm) high, channel iron
high tensile 3" jr. I-beam, 16" (406mm) o.c.
sealed modular harness
sealed beam, flush/shock mounted (reflectorized)
standard
acid etched, undercoated, primed and painted

Optional Equipment

* additional deck length
* additional tie downs
* paver model (alum. ramps)
* spare tire/rim
* special color
* stake pockets/rub rail
* winch and cable