T-18DDB

Specifications

WEIGHT
CAPACITY
DECK LENGTH
DECK HEIGHT
OVER-ALL WIDTH
LOAD WIDTH
TONGUE LENGTH
RAMPS
DECK TYPE
BRAKES
TIRES
WHEELS
AXLES
HUBS
HITCH
TIE DOWNS
PARKING JACK
SAFETY CHAINS
TOOL BOX
MUD FLAPS
SIDE RAILS
MAIN FRAME
HEAD BOARD
X-MEMBERS
WIRING
LIGHTING
REG. HOLDER
FINISH

4,660 lbs. (2114kg)
18,000 lbs. (8165kg) with adequate hitch load
20'-0" (6096mm) main deck w/ 3'-0" (914mm) beavertail @ 10 deg.
22 1/2" (572mm) empty
8'-6" (2591mm)
82" (2083mm) between fenders
5'-0" (1524mm)
adj., 19 1/4" (489mm) x 5'-0" (1524mm), spring assisted, 15 deg. load angle
2" nominal oak
electric, with wet cell break-a-way system, both axles (12 1/4" x 3 3/8")
(4) 215/75R x 17.5, 16 ply, load range "H"
(4) 6.75 x 17.5, 8 bolt
(2) 10,000 lb., Torflex
Oil Bath hubs (NOTE: Our literature incorrectly states E-Z Lube, should be Oil Bath)
adjustable 3" i.d. pintle ring
(6) heavy duty 3/4" forged D-rings
(1) 12,000 lb. drop leg (bolted on)
3/8" high tensile x 40" with safety hooks/latches
standard (tool box lid optional)
standard
3" (76mm) high
high tensile W10 x 17 beam (one piece cold formed tongue)
4" high (102mm), channel iron
high tensile 3" jr. I-beam, 16" (406mm) o.c.
sealed modular harness with circuit breakers
sealed beam, flush/shock mounted (reflectorized)
standard
acid etched, polyurethane undercoating, primed and painted (before decking)

Optional Equipment

* additional tie downs
* attachment holders
* full width ramps
* gooseneck
* slipper spring suspension
* spare tire/rim
* special color (no metallic paints)
* stake pockets/rub rail
* tool box lid
* vertical boring machine option: both ramps mounted to same side
* winch and cable
* 2 5/16" ball coupler
* 25,000 lb. two speed jack